automatic transmission fluid Alfa Romeo 4C 2021 Instructieboek (in Dutch)

IN AN EMERGENCY
98
❒ with a second cable, connect the
negative terminal (–) of the auxiliary
battery to an earthing point
Eon the
engine or the transmission of the car to
be started;
❒ start the engine; when the engine has
started, remove the leads, reversing the
order above.
If after a few attempts the engine does
not start, do not persist but contact a
dedicated Alfa Romeo Dealership.
IMPORTANT Do not connect the negative
terminals of the two batteries directly!
If the auxiliary battery is installed on
another car, check that there is no
accidental contact between metallic
parts of the two cars.
BUMP STARTING
Never, under any circumstances, jump
start the engine by pushing, towing or
coasting downhill.
FUEL CUT-OFF SYSTEM
OPERATION
This intervenes in the case of an impact
causing:
❒ the fuel supply cut-off with the engine
consequently switching off;
❒ automatic door lock release;
activation of all lights inside the car;
❒ the switching on of the hazard
warning lights.
The digital warning light and the
dedicated message on the display
indicate the intervention of the system.
Carefully check the vehicle for fuel leaks,
for instance in the engine compartment,
under the vehicle or near the tank area.
112)
111)This procedure must be performed
by qualified personnel as incorrect
actions may cause high-intensity
electrical discharge. Furthermore,
battery fluid is poisonous and corrosive:
avoid contact with skin and eyes. Keep
naked flames and lighted cigarettes away
from the battery and do not cause sparks.
IMPORTANT
13)Never use a fast battery charger to
start the engine as this could damage the
electronic systems and the ignition and
engine supply control units.
WARNING

TECHNICAL DATA
130
FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.
Lubricant quality is crucial for engine operation and duration.
PRODUCT SPECIFICATIONS
28)
Petrol engine
lubricant
Replacement interval /
applicationsUseFeatures Genuine fluids and
lubricants
SAE 5W-40 ACEA C3 / API SN SELENIA SPORT POWER
Contractual Technical
Reference N. F052.H12According to Scheduled
Servicing Plan
In case of emergency, if the above specified lubricants are not available, products with the minimum indicated ACEA performance can be used for
topping up; in this case optimal performance of the engine is not guaranteed.SAE 75W-85 grade synthetic-base
lubricant. SAE 75W 85 API GL4TUTELA TRANSMISSION
GEARTECH
Contractual Technical
Reference N.F704.C08TCT automatic transmission
–TUTELA CS SPEED
Contractual Technical
Reference N. F005.F98Lubricant for electro-
hydraulic actuator
Molybdenum disulphide grease, for use
at high temperatures.
NL.G.I. 1-2 consistency TUTELA ALL STAR
Contractual Technical
Reference N. F702.G07Constant velocity joints
wheel side
Grease for constant velocity joints with
low friction coefficient.
NL.G.I. 0-1 consistencyTUTELA STAR 700
Contractual Technical
Reference N. F701.C07 Oils and greases
for driveline
Differential side constant
velocity joints
Specifications
9.55535-GH2
9.55550-MZ3
or
MS.90030-M2
9.55550-SA1
or
MS.90030-H1
9.55580-GRAS II
9.55580-GRAS II